InterTuneTv is proud to present in first in our line of Performance Enhancement Videos for the true Enthusiast! "Omniman's 1595cc 91 Octane 200whp NA B16 Project" is a series unlike any offered before. In this 2 DVD 6+ hour wrench turning experience, we take you through the overhaul and labor of the Tranny Rebuild and Regear, Cylinder Head, Engine Block Rebuild and Dyno Tuning. We visit our Sponsors and give you a "Behind the Scenes" look into how another 60NA Wheel Horsepower was made. This Documentary-Style How-To Video guides you step by repeatable step through the work done and how it reflected on the Dyno run by run! Quanitities are limited; reserve your copies while supplies last! First 100 will be numbered and endorsed by Omni and the Crew.
A 45 Minute Promo: <a href="http://home.broadpark.no/~tforland/Enco ... o_Reel.wmv" target="_blank">InterTuneTV DVD 200 B16 Promo!</a>
Block Segment 1 Trailer: A few things Omni did to make a few extra HP
<a href="http://home.broadpark.no/~tforland/01_B ... railer.wmv" target="_blank">Block Segment 1 Trailer</a>
Block Segment 2 Trailer: Teardown and reassembly of the rotating assembly
<a href="http://home.broadpark.no/~tforland/02_B ... railer.wmv" target="_blank">Block Segment 2 Trailer</a>
Tranny Segment 1 Trailer: Explaination of Mod and Teardown of Tranny
<a href="http://home.broadpark.no/~tforland/03_T ... railer.wmv" target="_blank">Tranny Segment 1 Trailer</a>
Tranny Segment 2 Trailer: Clutch and Flywheel Installation
<a href="http://home.broadpark.no/~tforland/04_T ... railer.wmv" target="_blank">Tranny Segment 2 Trailer</a>
Tranny Segment 3 Trailer: Installation of 4.785FD, ATS first and new 3-4 Synchro
<a href="http://home.broadpark.no/~tforland/05_T ... railer.wmv" target="_blank">Tranny Segment 3 Trailer</a>
Tranny Segment 4 Trailer: Installation of 4.785FD ring gear on ITR differential, mock up and final assembly
<a href="http://home.broadpark.no/~tforland/06_T ... railer.wmv" target="_blank">Tranny Segment 4 Trailer</a>
Cylinder Head Segment 1 Trailer: Omni goes over parts and the strategy of the headwork on this car
<a href="http://home.broadpark.no/~tforland/07_C ... railer.wmv" target="_blank">Cylinder Head Segment 1 Trailer</a>
Cylinder Head Segment 2 Trailer: We visit Tom from Portflow at his shop. Omni assembles the valvetrain
<a href="http://home.broadpark.no/~tforland/08_C ... railer.wmv" target="_blank">Cylinder Head Segment 2 Trailer</a>
Cylinder Head Segment 3 Trailer: We install the head and M22 cams on the car
<a href="http://home.broadpark.no/~tforland/09_C ... railer.wmv" target="_blank">Cylinder Head Segment 3 Trailer</a>
Dyno Segment 1 Trailer: We arrive at Trackmasters, visit Hytech Exhaust and Dynamic Autosports, meet Steve J the owner of the car
<a href="http://home.broadpark.no/~tforland/10_D ... railer.wmv" target="_blank">Dyno Segment 1 Trailer</a>
Dyno Segment 2 Trailer: Hondata Tuning Insues...
<a href="http://home.broadpark.no/~tforland/11_D ... railer.wmv" target="_blank">Dyno Segment 2 Trailer</a>
Dyno Segment 3 Trailer: M22 cams installed, initial tuning, Ride out to Church's Automotive. Steve puts down 206.5whp/123tq right after we hit the pump.
<a href="http://home.broadpark.no/~tforland/12_D ... railer.wmv" target="_blank">Dyno Segment 3 Trailer</a>
If you would like this DVD - mail me on <a href="mailto:tord@nippon.no">tord@nippon.no</a> and I will handle the rest. The price is 75€ for a dual DVD w. shipping to Europe.
More info here:
<a href="http://www.honda-tech.com/zerothread?id=1338941" target="_blank">http://www.honda-tech.com/zerothread?id=1338941</a>
<a href="http://www.honda-tech.com/zerothread?id=1319890" target="_blank">http://www.honda-tech.com/zerothread?id=1319890</a>
<a href="http://m24x.zeroforum.com/zerothread?id=1473" target="_blank">http://m24x.zeroforum.com/zerothread?id=1473</a>
